PecanPi DAC Rev 3.0
Original price was: $349.95.$174.95Current price is: $174.95.
& Free Shipping in the USAThe PecanPi DAC is a remarkably high-performance stereo DAC for the Raspberry Pi and Asus Tinker Board. It is based on dual flagship Burr-Brown (TI) PCM1794A DAC chips.
Product Documents
The PecanPi® DAC Rev 3.0 is a remarkably high-performance stereo DAC for the Raspberry Pi and Asus Tinker Board. It can also work completely on its own using the S/PDIF input.
PecanPi DAC Rev 3.0:
The PecanPi DAC is based on dual flagship Burr-Brown (TI) PCM1794A DAC chips. These devices use TI’s advanced segment DAC architecture to achieve excellent dynamic performance. Turn your single-board computer (SBC) into the ultimate music player. No other Rpi DAC offers this level of dynamic range, dual DAC chips, and an amazing built-in headphone amp.
Great for tinkerers and DIYers.
Supported SBC Models:
- Rpi: 2B, 3B, 3B+, 4B, 5, Zero, ZeroW
- ASUS: Tinkerboard & Tinkerboard S
Supported Rpi Software:
- Volumio
- moOde Audio
- Ropieee
- DietPi
- piCorePlayer
- OSMC
- Raspian
- Others
Supported Tinker Board Software:
- TinkerOS (v2.1.11 and newer)
-
PecanPi® DAC
-
Stacking header
-
4 x M2.5 20mm female standoffs
-
4 x M2.5 screws
-
4 x XLR Panel Screws
-
HW volume control disabled (SW volume control will work)
-
To get HW volume control order optional potentiometer (see picture)
-
-
Instructions
-
9V 2.5A Power Supply
-
Universal power supply for DAC. The DAC will power the RaspberryPi/Tinker Board.
-
Connector: 2.1mm ID x 5.5mm OD, center positive.
-
-
Steel Case (Assembly required, very simple just pliers, 1/16” Allen key, and two screwdrivers needed Phillips and flat head)
-
Case and all required hardware to complete assembly
-
Includes volume control potentiometer and knob
-
Case Size: 195 x 120 x 100mm (7.7 x 4.75 x 4.25in)
-
Includes S/PDIF connector
-
-
Optionally comes with pre-wired RCA or headphone connectors
-
*** Raspberry Pi not included
-
This case does not support RaspberryPi 4 models.
-
-
Acrylic Case (see pictures)
-
Supports Rpi 3 & 4 models
-
-
Volume Pot with Knob
-
Potentiometer with wires pre-soldered
-
Billet aluminum black knob
-
A video showing step-by-step assembly instructions: https://www.youtube.com/watch?v=78NWQz_Itzw
-
Any customs fees are the responsibility of the customer.
-
We won’t under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws.
| Weight | 3 lbs |
|---|---|
| Dimensions | 8 × 8 × 6 in |
Related products
-
2 x Starkrimson Amplifier Module
$749.95Add to cart150W ultra-high performance state-of-the-art audio power amplifier modules utilizing gallium nitride (GaN) transistors.
-
Stereo RCA to XLR Converter Module
$199.95Add to cartUltra-high performance, completely transparent stereo (2 Ch.) RCA to XLR true balanced converter.
-
Starkrimson Stereo Ultra DIY Kit 2.5
$2,349.95Select optionsThis is a DIY kit that includes all the parts needed to assemble a Starkrimson Stereo Ultra amplifier in the desired configuration. Soldering is required.
-
PecanPi+ DAC
$499.95Add to cartUltra-high performance, next-generation fully balanced DAC with headphone amp and volume control. Turn your Raspberry Pi into the ultimate Hi-Fi music player.
